Collection: Artwork Compatible

SGF Alpha HEAVY

Great quality cap and board!

These caps feel great, they fit perfectly onto the pro ko with the rims. Way better than the stock caps. Shipping was real quick too, only feedback I would give is I wish the colored options would be the same price as the default color. I would definitely grab more caps if that were the case

Unique and customizable would be the best way to describe these. I've tried quite a few different MX style buttons from SiTongs to SDB-202s from Crown and I like these as much as those. Great option for low profile screw ins and one of the few buttons on the market with a matte style texture for plungers (a plus for those who dislike fingerprints).

A little pricey for the set but they are made with a lot of care and attention to detail. I highly recommend them and plan to order more eventually! Support your grassroot projects.

SGF MonKeys Button Caps

Nice caps , have a nice tactile pleasant finish with clear coating.

Ultra BUTTs feel great to push and are much more accessible compared to similar buttons on the market. As always, customer service was top notch. I will be buying another set when I have a new build.

After 2 weeks with the 30mm BUTTs, these are now my favorite buttons -- by far. My preferred configuration is Concave MonKey caps w/ Kailh Choc V2 Reds.

I'm a JP-style button enjoyer, but SGF have accomplished something very special with these concave caps. They're silky smooth in "nekkid" PA-12 and every button press feels very confident. But, despite not being convex, you can still slide because of the smooth texture and rounded rims. Plus, the MX caps are extremely stable on the Kailh Choc V2 key-stem -- they don't pop out under regular use like some other buttons. I can't praise the 30mm concave buttons caps enough.

I prefer to use linear switches because I don't lift my fingers very high when I mash. That said, the tactile ChimPOMzee's are particularly satisfying to press -- they just don't fit my playstyle. Also, with the included O-Rings installed, BUTTs are super quiet but still bottom out very firmly.

Properly installed, BUTTs are very secure. And, with their horizontal quick-connect orientation, they are quite low-profile. Though, it did give me some trouble as the wires on my GND daisy chain were a bit short, so I had to be a little creative to make it work. Installation is much more involved than a snap-in button, but the time investment is worth it. It does take a bit of care with the integrated legs for the quick-connects, but SGF include spares just in case. As always, RTFM. Sidenote: the included toolkit is top-notch.

Lastly (and most importantly), SGF somehow trained monkeys to use magical lasers to turn dust into arcade buttons. I will continue to support monkeys in the workplace and buy more BUTTs to reduce the ever-growing banana deficit.

PRAISE THE MONKEH!

Quality button caps… found what I wanted so I bought a complete set.

These SGF buttons feel amazing to use, don't produce much sound (with my Shadow Hunting switches), and look great on my leverless. I was surprised to see how easy the installation went.

Everything was as advertised! I didn’t end up keeping them in my leverless but I was trying something new. One of the button’s pegs did break off in one of my switches but what can you do. Quick shipping and tracking and they gave me a banana laffy taffy :-)

So I didn't actually buy these yet, but definitely want to. I bought the LightFox from SpeedyLabs and I'd like to change out the keycaps for Convex ones. But I'm not sure if these would fit (both from the design standpoint of the Leverless itself and the keychrons switches too). From what I'm able to gather the default keycaps are 20.2mm and 25.3mm and have an mx cross stem? The sizes of the default LightFox Keycaps seem to be barely any bigger than the ones here. But I'm new to this so I have no idea what to suspect. Does anyone have personal experience with my situation before I act as my own guinea pig and test these out myself? Thanks.

yeah, these dust washers do what they're supposed to - they wash dust, they don't pinch your finger or scratch your plexi, no problem. but really, the custom artwork option is such a cool way to add a finishing touch to your stick!

i ordered several and they all came out perfectly, as you can see here. not only that, but SGF went above and beyond - when i realized my washers didn't quite fit a specific lever (seimitsu ls-40), SGF added a new washer size option to the site for me _that same day_.

great product, great customer service.

It works great conecting my ps4 controller to my xbox x. Thanks!

Hoo-hoo-HA (I've been working on speaking ape) you guys are awesome thank you so much for this lever less! My custom cover looks amazing and the feel of the new Bridget is perfect in my hands. I can't wait to try what you guys have in store for the future !