New v5.6 w/ ENIG finish! Includes more screw terminals for easy install, and supports PS5 with the use of the Honson F5 or Brook Wingman FGC

Note: Only fighting games supported on PS5. Without the use of an authentication device, the PCB will time out after 8 minutes of use on PS4 or PS5. Regular PS5 controllers will not work for passthrough authentication.

The SGF Eddie is based on the RP2040 Advanced Breakout Board PE v5.6, an open source design from TheTrain and n-i-x.

This board is compatible with popular footprints and wiring harnesses, so you can build your own stick with all of your favorite GP2040-CE features, including 1ms input response times!!!

Firmware comes pre-loaded on the board for testing, but new firmware can always be installed from the GP2040-CE website.

Important note: SGF is unable to provide direct instructions for building your own stick using this board, but we're happy to provide any support/documentation necessary for the board itself.

EXCHANGES ON THIS PRODUCT ARE ONLY GIVEN FOR DEFECTIVE ITEMS AND/OR SHIPPING DAMAGE. NO REFUNDS OR RETURNS.

New v5.6 w/ ENIG finish! Includes more screw terminals for easy install, and supports PS5 with the use of the Honson F5 or Brook Wingman FGC

Note: Only fighting games supported on PS5. Without the use of an authentication device, the PCB will time out after 8 minutes of use on PS4 or PS5. Regular PS5 controllers will not work for passthrough authentication.

Based on RP2040 Advanced Breakout Board from the GP2040-CE project.

Original design Copyright 2023 TheTrain and n-i-x

Licensed under CC BY 4.0

Country/region

Country/region

MonKey B.U.T.T. ULTRA Instruction Guide

Overview